Blue Iris

Re: Wyze V3

2022-02-28T05:20:46+00:00

"Could this be due to the fact that I'm in demo mode and this will not work until I have a license?"

No. You're missing something in the settings. Both V2 and V3 beta firmware work with BI 5, registered or demo as I've tried them both.

If you want to test out the RTSP feed to either wyze cam version, use VLC to load up the stream. If it doesn't work there, it's a settings issue on the camera, or firewall on the system you're using. If it works with VLC and not BI then it's a settings issue on BI.

Statistics: Posted by teredactle — Mon Feb 28, 2022 5:20 am

Re: Wyze V3

2022-01-16T19:47:20+00:00

I have been trying to test out Blue Iris before trying to purchase, and I first tried testing with a Wyze v2 and tried everything and don't get any success with that one, and then just now I finally flashed my Wyze v3 camera hoping it would be a better experience, and at the moment I get nothing from the camera when I configure it exactly as shown in the images from the post above. I'm not sure what I'm doing wrong, as I have RTSP enabled in the camera settings, so I'm at a loss why others seem to be working just fine but I cannot get any Wyze cameras to work. Could this be due to the fact that I'm in demo mode and this will not work until I have a license?

Statistics: Posted by jasonb — Sun Jan 16, 2022 7:47 pm

Re: Wyze V3

2021-10-09T15:43:24+00:00

Seems to be working quite well. I am currently watching a group with three V3 cameras and one V2 camera via the UI3 web interface as I type this and it seems to be working quite well. Almost everything is default settings, and are exactly the same as my V2 cameras. Here are three screen captures that should show my config. Note that because this forum is https and the images are from a non-secure web server, on some browsers (mainly Chrome), the images will not imbed. Therefore, I have posted the url for each image after what should be the imbedded image.

Let's see if I can make this work on this forum...

http://extraphotos.info/BlueIris/Cam_22_2021-09-25.png

http://extraphotos.info/BlueIris/Cam_22 ... -09-25.png

http://extraphotos.info/BlueIris/Cam_22 ... -09-25.png

You need to post one more screen shot to show how to make it work: the audio tab, showing it DISABLED. If enabled, it crashes bi every 3-10 seconds.

Statistics: Posted by yorlik — Sat Oct 09, 2021 3:43 pm

Re: Wyze V3

2021-09-27T16:20:04+00:00

I have used the exact same settings and it works, but video drops every 3 minutes or so.

If you check your logs, do you see many connection restored messages for the V3 Wyze cameras?

Statistics: Posted by juched — Mon Sep 27, 2021 4:20 pm

Re: Wyze V3

2021-09-25T18:37:01+00:00

Seems to be working quite well. I am currently watching a group with three V3 cameras and one V2 camera via the UI3 web interface as I type this and it seems to be working quite well. Almost everything is default settings, and are exactly the same as my V2 cameras. Here are three screen captures that should show my config. Note that because this forum is https and the images are from a non-secure web server, on some browsers (mainly Chrome), the images will not imbed. Therefore, I have posted the url for each image after what should be the imbedded image.

Let's see if I can make this work on this forum...

http://extraphotos.info/BlueIris/Cam_22_2021-09-25.png

http://extraphotos.info/BlueIris/Cam_22 ... -09-25.png

http://extraphotos.info/BlueIris/Cam_22 ... -09-25.png

Statistics: Posted by k6ccc — Sat Sep 25, 2021 6:37 pm

Re: Wyze V3

2021-09-25T02:45:17+00:00

Wyze released RTSP firmware for the V3 cameras yesterday. I flashed seven V3 cameras last night for RTSP to go along with my 15 V2 and 2 Pan cameras and they are all working nicely with BlueIris.

Here is a link to the Wyze forum announcement: https://forums.wyzecam.com/t/beta-testi ... ble/196922

Jim

How did you configure this? For me Blue Iris keeps dropping the connection and reconnecting every few minutes. If I enable RDP/UDP it seems stable but I see 15-20% CPU increase. Something isn't optimized in Blue Iris when using UDP as compared to TCP.

Statistics: Posted by juched — Sat Sep 25, 2021 2:45 am

Re: Wyze V3

2021-09-24T15:30:57+00:00

Has the global gas shortage now caused hell to freeze over

Statistics: Posted by TimG — Fri Sep 24, 2021 3:30 pm

Re: Wyze V3

2021-09-24T14:59:51+00:00

Wyze released RTSP firmware for the V3 cameras yesterday. I flashed seven V3 cameras last night for RTSP to go along with my 15 V2 and 2 Pan cameras and they are all working nicely with BlueIris.

Here is a link to the Wyze forum announcement: https://forums.wyzecam.com/t/beta-testi ... ble/196922

Jim

Statistics: Posted by k6ccc — Fri Sep 24, 2021 2:59 pm

Re: Wyze V3

2021-09-23T15:17:27+00:00

https://github.com/mrlt8/docker-wyze-bridge

RTMP/RTSP/HLS Bridge for Wyze Cam

Current Firmware V3

Can you please advise how to implement this process? I am not familiar with github. Thank you!!

Statistics: Posted by itravel — Thu Sep 23, 2021 3:17 pm

Re: Wyze V3

2021-09-20T02:12:33+00:00

https://github.com/mrlt8/docker-wyze-bridge

RTMP/RTSP/HLS Bridge for Wyze Cam

Current Firmware V3

Statistics: Posted by Helminiakj — Mon Sep 20, 2021 2:12 am

Re: Wyze V3

2021-07-06T23:43:18+00:00

Gotta be honest here- the Wyze cams cool little toys but should never be relied on for any real security. Eventually you'll get sick of their quirks and throw them in a box like I did.

I have a home network with about 20 POE cameras, but I recently got a vacation rental, an hour from where I live now. I have about 20, v3 wise cameras and plugs and thermostats. I love their products. I would like them to update the V3 so I could display it on the blue Iris software.

Statistics: Posted by Thixotropic — Tue Jul 06, 2021 11:43 pm

Re: Wyze V3

2021-06-24T16:56:09+00:00

Still no rtsp firmware for the V3 Wyze then

Statistics: Posted by TimG — Thu Jun 24, 2021 4:56 pm

Re: Wyze V3

2021-06-19T21:15:53+00:00

I have a home network with about 20 POE cameras, but I recently got a vacation rental, an hour from where I live now. I have about 20, v3 wise cameras and plugs and thermostats. I love their products. I would like them to update the V3 so I could display it on the blue Iris software.

Statistics: Posted by jbc37 — Sat Jun 19, 2021 9:15 pm

Re: Wyze V3

2021-01-01T15:06:48+00:00

Stephen: I would advise against building a system with a promise of future RTSP firmware. I imagine Wyze sell the cameras cheap, so they can charge $$$'s for their cloud recording. RTSP firmware is not in their commercial interest.

iammrbt: Thixotropic is both right and wrong about his reply.

Thixotropic stated that the Wyze RTSP support is lacking, and that he gave up with them. That would be the V2 cameras, but you have also mentioned RTSP firmware doesn't yet exist for the new V3's. I would say he was right and right

It is also common knowledge that multiple RTSP V2's don't play nicely together - I hope Wyze do a better job with the V3 firmware, but I won't be holding my breath...

Statistics: Posted by TimG — Fri Jan 01, 2021 3:06 pm

Re: Wyze V3

2020-12-30T14:15:41+00:00

Thixotropic is both right and wrong about his reply. The V3's do not currently support the RTSP firmware but Wyze has stated several times that they are "working on it" but have not committed to a timeline. The V2's and the Pan's both support RTSP firmware but it is a little buggy and even certain router settings (such as Airtime Fairness) can cause issues.

I have a ton of different security camera's (I work in the industry so many are sort of permanent loans) and Thixotropic is correct that for a "security" camera use there are many other options out there that will be more stable (just the nature of wireless really). However if you're on a budget and have $20 to spend, a V2 will make a great start for you.

Statistics: Posted by iammrbt — Wed Dec 30, 2020 2:15 pm