Blue Iris

Re: can no longer detect cameras

2021-08-18T23:56:40+00:00

There is a Foscam tool to find ip and port ect
https://foscamhelp.zendesk.com/hc/en-us ... amera-Tool

Statistics: Posted by Rickity — Wed Aug 18, 2021 11:56 pm

Re: can no longer detect cameras

2021-08-16T02:43:03+00:00

Open a cmd shell and enter: netstat -n
This gives me the IP addre4sses and port numbers of devices on my network.

Statistics: Posted by MikeBwca — Mon Aug 16, 2021 2:43 am

Re: can no longer detect cameras

2021-08-16T02:39:33+00:00

If you can find a Camera Search program, it will tell you the IP & Port # of the cameras. I use 'SearchTool for MJPEG' by Tenvis version 4.0.0.3. It works on ALL IP cameras - not just Mjpeg cameras. If you double click a camera, it will open your web browser to that camera, if it has a web interface.

Statistics: Posted by MikeBwca — Mon Aug 16, 2021 2:39 am

Re: can no longer detect cameras

2021-08-15T18:44:58+00:00

yes. the cameras are on my network. I can ping them and I can see them in my router's connected device list.

I cannot connect to the camera's web page. They do not appear to have any. As I said before, these cameras worked fine before being forced to upgrade to a new routere.

I expect that the issue is that I need to open up certain ports in order for the cameras to work. The old router probably had that port already opened.
I just don't know what I need to change

Statistics: Posted by andromedusa — Sun Aug 15, 2021 6:44 pm

Re: can no longer detect cameras

2021-08-15T17:26:25+00:00

First thing is to verify the cameras are on your network.

I'm sure u know this...

Either of these options will tell your the ip address of the carmera.
- Can you log into the cameras web page?
- Is the camera connected to your router?
You can do this by logging into your router and checking the 'IP List' of connected devices.

Statistics: Posted by MikeBwca — Sun Aug 15, 2021 5:26 pm

can no longer detect cameras

2021-08-15T15:20:38+00:00

Getting the following error message when trying to add a camera I know to be at 192.168.1.42:

Opening 192.168.1.42 port 80...
HTTP Get / request...
Failed with HTTP 12029
Opening 192.168.1.42 port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
Cantonk port 34567?
RTSP port open?
RTSP port detected!
Done

I had originally set my cameras up on a TP-Link AC3200 wireless router hard wired to a TP-Link TL-SG1016PE V3 | 16 Port Gigabit PoE Switch. Everything configured fine but the additional devices pushed the old router over its limit.

I bought a new netgear nighthawk router MR60 mesh router to replace the TP-link. Now none of configured cameras were reachable nor configurable from scratch. I am able to ping their IP addresses but I cannot get Blue Iris to recognize them.

any idea what I have messed up without knowing it?

Thanks

Statistics: Posted by andromedusa — Sun Aug 15, 2021 3:20 pm