Make sure the user is allowed remote access. LAN only is unchecked.
Make sure the user is allowed access to BI during the appropriate profiles.


If not set correctly the user will not be able to access BI from the remote endpoint. If you are using a custom schedule, double check those settings as well.

If you are using camera groups, the user must have access to a group that contains the appropriate cameras.


If not set successfully, specific cameras may not be visible at the remote endpoint. Push notifications will also NOT be received by the device.

In the user profile, you have the ability to restrict Push notifications by Profile. Confirm Push notifications are active in the user's profile for the appropriate profiles. Always good to start with NO restrictions, get the alerts working, then applying any restrictions.


Specific to mobile apps, this setting can prevent Push notifications to mobile devices.

If another user on another phone is receiving push alerts, test the non-working phone with the working user account. If working user account works on the non-working phone, then you know the phone is fine. The user account must not have correct permissions. An example of isolating the issue to user permissions or mobile device by leveraging a user account that we know works.

Mobile app server settings
If your phone is NOT listed, you first need to double check your Server settings on the mobile app.

User permissions
If the Server settings are correct, double check your User permissions above.

Web server advanced
Review the Web Server Advanced dialog. Make sure the mobile device is not blocked via the IP address.

If this device should receive Push notifications, confirm Push notifications are enabled for the user's phone (above).
This is another reason why Push notifications may not be going to your device.

Mobile tags can also prevent Push notifications and Alert actions. If you are using tags make sure the mobile phone in question has the tag associated with the alert.


The below action map shows this particular Push notification ONLY goes to devices with the security tag.

Tags can prevent any alert (not just Push notifications) from being sent to a mobile device. Best to not use tags and confirm the alert works. Afterwards, apply tags if necessary.

Make sure Legacy GCM is unselected. Only needed for very old models which get phased out over time.

If another user on another phone is receiving alerts, maybe test the non-working phone with the working user account. If the working user account does NOT work on the non-working phone, then you know the phone is the issue. An example of isolating the issue to user permissions or mobile device permissions by leveraging a user account that we know works.

If the working account does NOT work on the new phone:

• You have to double check your Server settings on the mobile app.
• Revisit your network setup, especially the Global settings -> Web server tab. Review the Web Server Advanced dialog as well. Make sure the mobile device is not blocked via the IP address.