Blue Iris

Re: AI doesn't work after update(s)

2024-05-19T04:15:59+00:00

Check the port number it is sending to. I watched a video and that had a port number that was no where even close to what mine said.

Statistics: Posted by veldthui — Sun May 19, 2024 4:15 am

Re: AI doesn't work after update(s)

2024-05-14T17:29:39+00:00

I found I always had to reboot the BI5/CPAI pc following updates. I'm hoping that will settle down when CPAI isn't so "Beta". It does get better with every iteration though.

Anyway, if you find a bug, and you can make it happen on demand, we can let Ken know.

Statistics: Posted by TimG — Tue May 14, 2024 5:29 pm

Re: AI doesn't work after update(s)

2024-05-13T21:59:37+00:00

and happened again wit ver 5.9.1.2 (and the ones in between) ... again .. full system restart was required to get AI running

I'm runng MQTT logging and BI update does not properly shutdown the MQTT service when doing the upgrade .. the service is terminated but not shutdown

I usually gett MQTT messages for Blueiris/App
- running
-stopping
- starting

but they dont apear when an upate is executed
-

Statistics: Posted by xxxNexusxxx — Mon May 13, 2024 9:59 pm

Re: AI doesn't work after update(s)

2024-05-01T00:07:08+00:00

just upgraded to 5.9.0.5 ... it happened again ... AI was not able to restart (not even with manula start via Settings->AI->Start_Now)

Only full system restart was able to start the AI and BI properly

Statistics: Posted by xxxNexusxxx — Wed May 01, 2024 12:07 am

Re: AI doesn't work after update(s)

2024-04-26T22:28:26+00:00

Depends what version you were on but quite a while ago there were threads about having to do a find/inspect and also in some cases having to disable a security setting for ONVIF in the cam itself.

I think I found the problem... AI was moved from Trigger to Alerts... Alerts didn't have ONVIF enabled, but it worked fine when AI was in the trigger page. I still get recordings from the ONVIF cameras without that box checked in Alerts, they just don't forward into the AI, I'll try enabling that box.

Statistics: Posted by notspecial — Fri Apr 26, 2024 10:28 pm

Re: AI doesn't work after update(s)

2024-04-26T19:02:23+00:00

Have you done a find/inspect after updating?
I did not know this was necessary. I will do this and test again.

Are there any errors recorded in the BI logs?
No errors at all.

Depends what version you were on but quite a while ago there were threads about having to do a find/inspect and also in some cases having to disable a security setting for ONVIF in the cam itself.

Statistics: Posted by IAmATeaf — Fri Apr 26, 2024 7:02 pm

Re: AI doesn't work after update(s)

2024-04-26T18:02:19+00:00

Have you done a find/inspect after updating?
I did not know this was necessary. I will do this and test again.

Are there any errors recorded in the BI logs?
No errors at all.

Statistics: Posted by notspecial — Fri Apr 26, 2024 6:02 pm

Re: AI doesn't work after update(s)

2024-04-26T06:50:45+00:00

Have you done a find/inspect after updating?

Are there any errors recorded in the BI logs?

Statistics: Posted by IAmATeaf — Fri Apr 26, 2024 6:50 am

Re: AI doesn't work after update(s)

2024-04-26T03:40:15+00:00

I have the same issue after BI-Update that my CodeProject is not started automatically (this happend only recently and I thought it was my setup)

After manual restart of AI (Settings->AI->"Start Now") everything works fine

Im runining BI (5.9.0.1) on a dedicated machine with CodeProject 2.6.2 (mesh setup)

Thanks for the Idea, I have codeproject set to run under system services and not controlled by BI, its up and running but still breaks if I go past 5.7.9.12 (only with those ONVIF alert cameras) but not with the BI motion one, in fact that one starts working better.

Statistics: Posted by notspecial — Fri Apr 26, 2024 3:40 am

Re: AI doesn't work after update(s)

2024-04-26T00:20:28+00:00

I have the same issue after BI-Update that my CodeProject is not started automatically (this happend only recently and I thought it was my setup)

After manual restart of AI (Settings->AI->"Start Now") everything works fine

Im runining BI (5.9.0.1) on a dedicated machine with CodeProject 2.6.2 (mesh setup)

Statistics: Posted by xxxNexusxxx — Fri Apr 26, 2024 12:20 am

AI doesn't work after update(s)

2024-04-25T18:22:32+00:00

Running version 5.7.9.12 everything works great for me. I have 4 amcrest 4K AI cameras and 1 Hikvision 2MP camera.
I'm running motion sensing within BI for the Hikvision and it's AI works great, I'm running Tripwire/IVS on the Amcrest cameras and AI works great.
Running Code Project 2.6.2
Now If I upgrade past 5.7.9.12 to ANY version after that. My AI immediately stops working on everything but the Hikvision running Blue IRIS's built in motion. Basically no AI gets processed for ONVIF alerts. I've scoured release notes and options to see anything that may have changed.
Why am I running the detection on the Amcrest cameras with ONVIF alerts? Simple, I don't have the CPU capacity in this older system / VM to be able to do full motion processing. If I try I'll spike 100% quickly. But, running just recording and AI confirmation mainly for person detection runs me at about 12% CPU.

Anybody have an ideas? I'd like to update as there have been many versions but not if it stops alerting me to people. I've had issues with Push notifications before, but that's not the case here, looking at logs it doesn't even seem to be forwarding ONVIF events to CodeProject...

Statistics: Posted by notspecial — Thu Apr 25, 2024 6:22 pm