I found that I had to restart the system after changing the pre-trigger values back to their default in order for the system to be stable. If I changed them back to default but did not actually restart the service, it was still unstable but if I restarted (or actually, reinstalled 5.9.2.2) after cha...

There is not any option to disable pre-trigger settings ... However, when I set to 5 and 5, and when Bruce had a 5 and 2, the problem could not be recreated so in effect, the 5 sec pre-trigger record time seems to be the system default which works and does not cause an issue. In essence, that would ...

I monitored for an hour before restarting BI Time = 0, RAM = 638 MB Time = 30 min, RAM = 4.4 GB Time = 60 min, RAM = 9.96 GB At 60 min, I restarted the system. I have sent support all these latest details along with screen shots of BI and Procexp at time = 0 min, 30 min, and 60 min. Hopefully, this ...

Much more testing ... I believe the issue is directly tied to the change in 5.8.9.10 where pre-trigger record and playback times were introduced. I changed all cameras to have both pre-trigger record and playback time = 5 sec to match the buffer time (which was forced in 5.8.8.12 and earlier since t...

Interestingly, ver 5.8.9.10 is the first version that had the new "pre trigger record time" and "pre trigger playback time" options so maybe there is something going on with those features and causing something to go awry when the stream starts ? don't know why there would be any...

Are you using Code Project with IPCAM Custom Models ? My issues only began a couple of weeks ago when I decided to try using the ipcam-custom models; prior to that all 6 of the systems I manage were stable even on the newer versions of BI. What I find is that with custom models on (default object de...

I have done a bunch more troubleshooting and narrowed my problem down to something that changed between BI 5.8.8.12 and 5.8.9.10; stable on 5.8.8.12 but memory issues manifest for me in 5.8.8.12 and newer. You can see my posts in another thread with info on my tests. https://blueirissoftware.com/for...

This has been driving me nuts so I went back to BI 5.8.5.8 without changing any other settings in either BI or CP then repeatedly tried to trigger the issue by making a minor change to settings on every camera over and over again. I was not able to get the problem to occur. Then I tried 5.8.7.11, an...

Hmmm ... unfortunately, I was wrong and it is nothing to do with the 180deg hikvision cameras. Last night, I went to another BI system I manage that had been stable since installed with no ram issues at all. It only has 4 cameras and it is normally less than 500 MB RAM. I updated to BI 5.9.1.6 and C...

Good news is that we have a workaround (restart BI Service after every edit). I think I have further narrowed it down to editing settings on some new Hikvision 180 deg Cameras (2CD2387G2P); not certain but in any case, it definitely is much more likely to happen if I edit settings on these cameras. ...