On the General tab (page 1) I see that there is a main and sub stream and I have heard that the second number after the / should be above .5 and I am seeing that in the main stream it is .5 and in the sub stream it is .25
so I am not sure I am setting my cameras up.

Under the Network IP I have set the cameras up using RTSP and manually adding the settings for main and substream (Page 3)
If I click Find/Inspect it does change the settings that are different

Was hoping someone who has been using the 820a's with BI5 reliably, could look at the settings I uploaded to a pdf file and provide some guidance/recommendations on settings

https://drive.google.com/file/d/1UksmDV ... sp=sharing

Check his video and write up
https://www.thesmarthomehookup.com/alte ... atibility/

I recently got a 820A and BI5 and still learning how to tweak.
According to video the .5 and .25 can't be changed and hardcoded in ReoLinks.

Update- 7/15/21
Reolink released FW that supports iframe now for 820 and a few others and has to be set on each the camera (not BI). I have mine set to 2 (1-4 option) not sure if that is correct thou.

biuser1 wrote: ↑Wed Jul 14, 2021 4:13 am
Update- 7/15/21
Reolink released FW that supports iframe now for 820 and a few others and has to be set on each the camera (not BI). I have mine set to 2 (1-4 option) not sure if that is correct thou.

Hi,
Could you please give a link to that firmware or its build?
I've searched on https://support.reolink.com/hc/en-us/se ... 4-Firmware
I'm Using 21012101 on my RLC-820A and cant find that option.

Thank you,
Paulo Medronho

arganaz wrote: ↑Mon Jul 19, 2021 11:39 am Hi,
Could you please give a link to that firmware or its build?
I've searched on https://support.reolink.com/hc/en-us/se ... 4-Firmware
I'm Using 21012101 on my RLC-820A and cant find that option.

Thank you,
Paulo Medronho

https://reolink.com/download-center/

It's version 3.0.0.412

Thank you,
I got it working now.
Hope other models get the update also (Without AI, for me 520 and E1Pro)