Hello,

I have a couple Arecont 10mp cameras w/ 100' IR's They work great in Milestone but not so well in BI. Blue Iris doesn't recognize substreams and only puts the cameras at 2.1 MP. The cameras are 10225PMTIR. I have their last firware loaded but they have since disoconued the cameas. BI doesn't recognize all of the features and I'm guessing it's becasue of the Discovery/ONVIF port is incorrect. BI sets it at 8999. Any suggestions or is it a lost cause, hope not.

Any ideas on different ports to try?

They are ONVIF complient - ONVIF Profile S, PSIA Conformance

I really don't want to buy 2 new cameras.

Thanks,

MIchael

Could you not try changing the port on the cam itself to see if BI can then properly detect the cam?

I've had a look at the installation manual, and it doesn't mention Onvif ports or settings, however this Arecont Support page does. I was going to suggest using ODM to find the settings, but it's all in that Support info.

This Support page shows how to connect to rtsp streams.

Good luck

Thanks Tim. I tried both yesterday in fact tried again today w/ no luck. ODM timesout everytime.When i run the command for the HTTP port I get "Error: Unknown parameter or value missing."

Michael