Hi, I have been using BI for 3 years now and decided to allocate one of my cameras (8MP IP ) to view car number plates.
Using ONVIF configuration I zoomed onto the road outside and set up the camera for day time viewing, when a vehicle goes past I can stop the BI clip and view the number plate successfully, however when its night I need to change the setting and cannot get a great view of the number plates, when I can get this to work in the morning the view is too bright to see anything and I have to adjust it again for the day. I have tried many various settings of the camera using ONVIF but cannot find one that fits day and night.
Can you suggest a camera that is suitable for day and night viewing where I can read number plates of cars passing by, I dont particularly want an ANPR capture of these plates , just the option of finding the vehicle number if there is an incident which I will see on my other cameras. Distance to road in my attachments is about 25 metres.
Camera suggestion for day and night vision
Camera suggestion for day and night vision
- Attachments
-
- just see number plate at night
- Night.png (105.25 KiB) Viewed 1906 times
-
- after the night , bright viewing
- Morning.png (205.81 KiB) Viewed 1906 times
-
- morning after adjustment of ONVIF
- Morning adjusted.png (188.06 KiB) Viewed 1906 times
Re: Camera suggestion for day and night vision
What type of camera is it ? Most of mine are able to sort themselves out for day/night using an inbuilt light sensor. The Dahua ones can be forced to remain in colour too. I am impressed with that number plate in the dark though; what is illuminating it ?
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Problem ? Ask and we will try to assist, but please check the Help file.
Re: Camera suggestion for day and night vision
It was from a company called Genie in the UK, bought these cameras and NVR but found NVR was not good and then I found BI. attached data sheet for the 4MP camera as I dont have the sheet for my 8MP ones..
I think the number plate is visible due to a very low street light nearby, its the only plate I can see at night
What Dahua camera are you using, I will look into getting one of them if its colour day and night. How do you access its settings, via ONVIF or what?
I think the number plate is visible due to a very low street light nearby, its the only plate I can see at night
What Dahua camera are you using, I will look into getting one of them if its colour day and night. How do you access its settings, via ONVIF or what?
- Attachments
-
- Camera data 2.png (196.75 KiB) Viewed 1881 times
-
- Camera data1.png (120.54 KiB) Viewed 1881 times
Re: Camera suggestion for day and night vision
Most IP cameras have settings that can be accessed via a web page at the IP for that camera. Are you doing something different ?
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Problem ? Ask and we will try to assist, but please check the Help file.
Re: Camera suggestion for day and night vision
The web page brings up the same screen as I get using ONVIF, screen shot of the settings attached. I am probably going to buy another camera that I can use for this vehicle plate capture, but so many models and options out there I didnt want to waste my money by getting the wrong one.
- Attachments
-
- Onvif settings day.png (253.19 KiB) Viewed 1864 times
Re: Camera suggestion for day and night vision
If the day/night mode auto switching works, it should be as simple as making different settings for day and night in that menu.
If it doesn't auto switch then there may be manual controls, but unless they track daylight hours it will be a mess. Some of the Dahua cameras allow changes by sending commands.
If it doesn't auto switch then there may be manual controls, but unless they track daylight hours it will be a mess. Some of the Dahua cameras allow changes by sending commands.
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Problem ? Ask and we will try to assist, but please check the Help file.
Re: Camera suggestion for day and night vision
Hi TimG,
many thanks for the advice you have given me, I now understand more about setting up the camera and I did manage to set up the day/night mode on my camera, however the shots are very dark at night despite trying difference settings and as the camera is over 5 years old and only black and white at night I thought I would buy a new camera (or 2?) to replace them. I see your camera is colour at night as are a lot of them I have been looking at, would you recommend the Dahua cameras?
many thanks for the advice you have given me, I now understand more about setting up the camera and I did manage to set up the day/night mode on my camera, however the shots are very dark at night despite trying difference settings and as the camera is over 5 years old and only black and white at night I thought I would buy a new camera (or 2?) to replace them. I see your camera is colour at night as are a lot of them I have been looking at, would you recommend the Dahua cameras?
Re: Camera suggestion for day and night vision
The Dahua cameras have been very good for me, but I haven't bought any recently. I stopped at 2MP 1080P cameras and actually bought a box of the PTZs. For night viewing, you need to look at the minimum Lux specifications. For the above camera you have:
Which shows minimum Lux as 0.011. Cameras like my old Dahua DH-IPC-HDW5231R-ZE have these specs:
The difference with the old Dahua was the "Starlight" sensor, and that 0.006 Lux means it can see in colour when my eyes see darkness. I'm not expecting you to buy this camera, but do look at the spec for minimum illumination for whichever camera you are interested in. I'm sure there are now better cameras, but this is a home installation and I'm not going to rip out a working installation to chase Megapixels.
- Lux.png (19.8 KiB) Viewed 1805 times
Which shows minimum Lux as 0.011. Cameras like my old Dahua DH-IPC-HDW5231R-ZE have these specs:
- DahuaLux.png (13.22 KiB) Viewed 1805 times
The difference with the old Dahua was the "Starlight" sensor, and that 0.006 Lux means it can see in colour when my eyes see darkness. I'm not expecting you to buy this camera, but do look at the spec for minimum illumination for whichever camera you are interested in. I'm sure there are now better cameras, but this is a home installation and I'm not going to rip out a working installation to chase Megapixels.
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Problem ? Ask and we will try to assist, but please check the Help file.
Re: Camera suggestion for day and night vision
Hi TimG,
The Dahua cameras look good, seen many for sale but not in UK, where do you buy yours?
not sure about Hikvision, do you think these will work with BI?
The Dahua cameras look good, seen many for sale but not in UK, where do you buy yours?
not sure about Hikvision, do you think these will work with BI?
Re: Camera suggestion for day and night vision
I had one varifocal from Andy on the dark site, and bought a box of nine ptz's on Ebay. Half price because they were "only" 2 MP 
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Problem ? Ask and we will try to assist, but please check the Help file.