BI relies upon connectivity to the cam so that it can pull the stream direct so the only way I can think of right now is to setup routing so that BI can talk to the remote cams direct. Most cloud based solutions and cams that write to the cloud are proprietary and won’t typically allow anything else...

Windows Defender these days is good enough, if you are paying for BitDefender I personally would save some money.

I assume you are moving the file in effect which is why you can no longer see it.

Once it has been moved BI can then no longer access the file unless you FTP it back ?

Can I take a guess as to your next post?

Starting with maybe a 3 ?

Sounds like an issue with the either the cams or the cabling so you need to test both to establish what the problem is. First thing is to check the cables and the termination for any signs of corrosion, also check the actual network connector in the cam itself. Personally I’d just cut off the old pl...

If your support has expired you need to either renew your support or find a copy of BI that was released on or before your support expired.

BruceH wrote: ↑Mon Jul 22, 2024 6:20 pm Set it to run as a service!

^ This

Unless you are looking to auto start the GUI when you logon, think it will prompt for admin elevation as BI by default needs to be run as admin. If this is what you want to do have a look at disabling UAC.

To many possibilities as to what it might be but 10Gb for New is way too small especially so first thing I would do is try increasing that. Also New on C: where your Os is, not something that I would do. If all you are doing is moving files from C to D then don’t bother moving things around, there r...

To get the most basic stuff running it’s actually not that hard and many people are happy with that and leave it that way. BI though is capable of a lot more and it’s this stuff that needs thought and lots of reading. The forums here are just a bunch of people with a common interest so I know you sa...

I get the same with my Dahua cams, enable the noise filter and for some reason the cams audio becomes a fizzy, banging, popping, rustling mess?