Camera disconnecting by itself

General discussion about Blue Iris
Post Reply
papounet71
Posts: 36
Joined: Wed Nov 24, 2021 7:00 am

Camera disconnecting by itself

Post by papounet71 »

Good morning
for some time my camera has been disconnecting and reconnecting for no apparent reason, does anyone have an idea of the problem.
I am connected via ethernet
Thank you so much
Attachments
Sans titre-1.jpg
Sans titre-1.jpg (162.6 KiB) Viewed 1293 times
User avatar
TimG
Posts: 2391
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Camera disconnecting by itself

Post by TimG »

Hi, anything in the Log ?
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
BruceH
Posts: 89
Joined: Wed Apr 01, 2020 10:10 pm

Re: Camera disconnecting by itself

Post by BruceH »

Does the camera reconnect if you run the discovery again, have you checked to see if the camera IP has changed, can you view the video directly from the camera, to check if the camera itself is still functioning?
BlueIris 5.9.3.4 CPAI 2.6.5
User avatar
TimG
Posts: 2391
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Camera disconnecting by itself

Post by TimG »

And after that, does this camera have audio ? If not, ensure Audio is OFF in the BI5 camera settings, else the BI5 watchdog will keep stopping the camera.
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
BobRoss
Posts: 15
Joined: Wed Aug 09, 2023 4:40 pm

Re: Camera disconnecting by itself

Post by BobRoss »

Are you by any chance using Lorex cameras? This is happening to me too after a firmware update and Lorex told me there is no going back. This signal loss is occurring even when the camera are just connected to the standalone NVR so might not be BI related at all.
Last edited by BobRoss on Fri Jun 14, 2024 12:34 am, edited 1 time in total.
User avatar
TimG
Posts: 2391
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Camera disconnecting by itself

Post by TimG »

In a second thread by the OP it was found to be the audio watchdog issue I mentioned above.

In your case Lorex have created a firmware that doesn't work with Lorex nvr's ? That needs sorting at their end, but I would be scouring the internet for a method to revert the firmware.
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
BobRoss
Posts: 15
Joined: Wed Aug 09, 2023 4:40 pm

Re: Camera disconnecting by itself

Post by BobRoss »

TimG wrote: Thu Jun 13, 2024 4:34 am
In your case Lorex have created a firmware that doesn't work with Lorex nvr's ? That needs sorting at their end, but I would be scouring the internet for a method to revert the firmware.
Yeah, I don't know what is going on. They work for 3-4 hours then randomly loose signal for 1-3 min and then come back.

I'm trying to figure out how to flash them with compatible firmware from other manufacturers, but can't really find a good starting point.
Post Reply